Floating, Bracketed and Wall-Mounted Shelves
Floating shelves may use concealed brackets, while standard shelves rely on visible supports or tracks. Send the shelf and bracket product so the mounting pattern is known. Several shelves arranged as one composition should be planned together rather than treated as unrelated holes in the wall.
Drywall, Plaster, Brick and Concrete Walls
Wall material affects drilling, anchors and whether the manufacturer hardware is suitable. Drywall over studs, plaster, brick and concrete need different approaches. Hidden pipes or wires can also matter; an installation page should not claim certainty about unseen conditions.
Shelf Layout, Spacing and Leveling
Provide the number of shelves and desired wall area. For kitchen, office or living-room shelves, consider what sits below and how far the shelves project. Consistent spacing should be agreed before drilling. Uneven old walls can also make visual alignment different from measuring one point alone.
Intended Load and Manufacturer Hardware
Tell NY-GoodHome what the shelves are intended to hold and provide any manufacturer load information. The installation can follow the supplied system, but NY-GoodHome does not independently certify wall or shelf load capacity. Heavy specialty storage may require a different system or structural review.
Kitchen, Office and Living-Room Shelving
Different rooms can introduce different obstacles: tile backsplashes, desks, outlets or existing cabinetry. Send a wider room photo to show these conditions. Closet systems have their own installation page because the rails, drawers and hanging rods form a larger system.
Standard Shelves vs Custom Built-Ins
For wall-to-wall, alcove or floor-to-ceiling systems use Custom Shelving & Bookcase Installation. Freestanding bookcases use Bookcase Assembly. Adjacent art mounting uses Picture & Artwork Hanging. Send shelf links and wall photos through Contact.
Before Shelf Installation Is Scheduled
List each shelf length/depth and bracket system, and state what the shelves are intended to hold. Mark the desired positions on a wall photo if possible. If shelves need to align with cabinets, desks or tile lines, show those reference points. Heavy storage or unusual substrates should be identified before ordinary wall mounting is assumed.