Hose-Connected vs Pumped Misting Systems
Identify whether the kit connects to a standard hose/spigot or uses a dedicated pump and permanent plumbing. The latter can move the project into licensed trade scope.
Nozzle and Line Layout
Have the manufacturer’s layout guidance, line length and nozzle count ready. The kit’s stated pressure and placement requirements should guide the layout, and custom system design should be discussed separately.
Water Source and Pressure Requirements
Have the product’s water and pressure requirements and the existing connection type ready. Changes to plumbing or a pressure system need a separate assessment by the appropriate specialist.
Mounting to Pergolas, Patios or Structures
Lines may attach to pergola beams, patio covers or other supports. The existing structure must be suitable, and drilling/fastening should not compromise waterproofing or structural systems.
Pump Power and Electrical Boundary
Plug-in pumps differ from hardwired equipment. New circuits and outlets require appropriate electrical work. See General Electrical Services when new power is part of the project.
Winterization and Permanent Plumbing Boundary
Permanent plumbing and freeze protection need to be planned for the actual system. Related Pergola Installation and Patio Cover Installation services cover the supporting structures. Have the kit, water connection and power details ready, then call using Contact.
Before Misting System Installation
Provide the manufacturer kit, total line length, nozzle count, water connection type, pump model and power method. Show the structure where lines will mount and note winter exposure. If the system needs new plumbing, a pressure-pump circuit, permanent wall penetrations or custom hydraulic design, it should be routed to qualified plumbing/electrical scope rather than treated as a simple hose-connected kit.
Confirm water pressure, mounting conditions, power and winterization requirements for the actual system before installation.
