Single, Double and Bay-Window Rods
Single rods are straightforward when the span and brackets are appropriate, while double rods add a second projection and more hardware. Bay-window systems can use linked corners or several rod sections. Send the product and the full window arrangement so bracket positions can be planned before drilling.
Ceiling Tracks and Drapery Hardware
Ceiling-mounted tracks can work where wall space is limited or where a floor-to-ceiling drapery look is desired. Ceiling material and joist/support conditions matter. Heavy commercial track systems or concealed architectural tracks may require a different scope.
Window Width, Bracket Spacing and Drape Weight
Provide window/opening width and the intended rod extension beyond each side. Heavy drapes can require different support spacing from lightweight curtains. NY-GoodHome does not certify arbitrary load capacity; the product and mounting condition should guide the installation.
Plaster, Brick, Concrete and Drywall
New York interiors can include old plaster, masonry/concrete and modern drywall. Each substrate changes drilling and fastener selection. Send close-up wall/ceiling photos when the material is uncertain. Property restrictions on drilling should be disclosed before scheduling.
Height, Ladder Access and Final Placement
Note ceiling height and the desired rod/track height. Tall rooms or stairwells can require different access equipment and may be outside ordinary mounting capability. Furniture near the windows should also be considered for working clearance.
Curtain Rods vs Blinds, Shades or Shutters
Blinds and shades use Window Treatment Installation, while interior shutters use Shutter Installation & Replacement. Related wall decor uses Picture & Artwork Hanging. Use Contact with window count, rod/track products and wall/ceiling type.
Before Rod or Track Installation
List every window and identify whether the rod/track will mount to the wall, ceiling or window trim. Provide the drapery weight if known and photograph any plaster cracks, masonry, crown molding or obstacles near the proposed brackets. Motorized systems should be identified as battery, plug-in or hardwired so electrical scope is not assumed.